|
Home
Special Offers
Plinth and Fan Convector Heaters
Contact Numbers
Cannon Products
Robinson Willey Products
Valor Fires
Gas Fires
Electric Fires
Over Sink Water Heaters
Heatrae Sadia ElectroMAX
Water Treatment Products
Central Heating Boilers
Gledhill Products
Copper Cylinders
Controls and Accessories
Underfloor Heating
UF Heating Products
Water pumps
Fire surrounds
About Us
Contact Us
Ordering
Product Installation
Terms of Business
Order Form
Fire and Gas Safety
MagnaClean System Maintenance
| |
| Gledhill
Copper cylinders and Combination Cylinders |
| Gledhill
products represent superior quality. Gledhill products
are manufactured under an ISO 9001:2000 quality management system
which is independently audited and accepted by the British Standards
Institute. All products meet or exceed industry standards and comply
with Water Regulations and Building Regulations. |
| To satisfy
specialist applications, horizontal cylinders can be manufactured
complete with cradles or twin cylinders where only narrow spaces are
available but large capacities are required. |
| Solar
Cylinders are also available and can be fitted with two or more
heat exchangers. |
|
|
|
|
| The tables given
represent the most commonly ordered sizes and the capacities stated are
based on direct types. |
| Double feed indirect
types are also available in a comprehensive range of sizes, although the
capacities indicated are nominal and would take into account the inclusion
of the coil. |
|
Cylinders can be manufactured to your specification
If the
cylinder you require is not shown in this section please don't hesitate to
call for assistance. (02392 349636) |
|
If you have a
specific or unusual requirement a cylinder can be manufactured or adapted
to your specification. For
further information please click here
|
Price
List - April 2008
|
INDIRECT Copper
Cylinders to British Standard |
| Fitted with: |
Options: |
- 1" bosses
- 2 1/4"
IMH boss
(Immersion heater not included)
- 30mm Rockwool
Insulation.
|
- 60mm Insulation
- High recovery coil
- 15, 22 or 28mm
compressions
|
- 1/2" Drain off
- Shower take off
- Secondary Return
- Incalloy Immersion
heater
|
| |
mm |
Capacity (litres) |
inches |
£ inc VAT and delivery** |
|
|
 |
1500 x 300 |
96 |
60 x 12 |
£210.66 |
| 1800 x 300 |
114 |
72 x 12 |
£273.82 |
| 900 x 400 |
96 |
36 x 16 |
£175.34 |
| 1050 x 400 |
114 |
42 x 16 |
£176.78 |
| 1200 x 400 |
134 |
48 x 16 |
£205.73 |
| 750 x 450 |
95 |
30 x 18 |
£166.60 |
| 900 x 450 |
117 |
36 x 18 |
£176.78 |
| 1050 x 450 |
140 |
42 x 18 |
£199.94 |
| 1200 x 450 |
162 |
48 x 18 |
£223.13 |
| 1800 x 450 |
265 |
72 x 18 |
£390.60 |
|
|
DIRECT Copper
Cylinders
to British Standard |
| Fitted with: |
Options: |
- 1" bosses
- 2 1/4"
IMH boss
(Immersion heater not included)
- 30mm Rockwool
Insulation.
|
- Low level IMH boss
- 15,22 or 28mm
compressions
|
- 1/2" drain off
- Secondary return
- Immersion heater
|
| |
mm |
Capacity (litres) |
inches |
£ inc VAT and delivery** |
|
|
|
 |
900 x 400 |
98 |
36 x 16 |
£153.59 |
| 1050 x 400 |
116 |
42 x 16 |
£155.01 |
| 750 x 450 |
98 |
30 x 18 |
£157.46 |
| 900 x 450 |
120 |
36 x 18 |
£164.15 |
| 1050 x 450 |
144 |
42 x 18 |
£173.86 |
| 1200 x 450 |
166 |
48 x 18 |
£188.35 |
| All
cylinders are compliant with Part L Building Regulations. Fitted with
FlexiLag insulation. |
**Delivery
included to most parts of mainland UK. Some parts of Scotland, Wales, the West
Country and Islands around the UK may require special delivery arrangements, for
which there may be a charge. Please don't hesitate to enquire.
|
