Home
Up

New ElectraMate A-class

Mains Pressure Hot Water and Heating Systems from Gledhill

 

Model

EMA 6kW

EMA 9kW

  

Components of the ElectraMate A-Class
         
Price (inc VAT & Delivery)

£2080.68

£2195.97

  

Storage Vessel

Plumbed and wired with:

  • Grundfos UPS pump – space heating

  • Grundfos UPR pump – heater circuit

  • Grundfos UPR pump – hot water

  • Plate heat exchanger

  • F&E Tank complete with fittings

  • Full control and diagnostic system

  • Programmable room thermostat

  • Fixing pallet

All pumps can be supplied as modulating for reduced running costs and noise for a modest extra charge

There is no requirement for:

  • Motorised valves and boiler bypass

  • Pressure or temperature relief valves

Immersion heaters that can never scale

Because the immersion elements are situated in the same primary water all the time and this water is not renewed, no scaling takes place, even in hard water areas. ElectraMate A-Class is designed to cope on the secondary side with most hard water situations (<250ppm). For extreme situations (>250ppm) we can supply a Gledhill in-line scale inhibitor fitted for very little extra.

Approvals

ElectraMate A-Class has been tested by WRAS, a member of the European Organisation for Technical Approvals ( EOTA) and found to comply with Water Regulations. In performance, it complies with the requirements of BS6700 and meets the NHBC criteria for domestic properties. Gledhill water Storage Ltd also operates a quality management system audited and accepted by the BSI in accordance with BS EN ISO 9001:2000.
Overall Dimensions (mm)      
Height 1550 1550  
Width 530 530  
Depth 595 595  
Minimum Cupboard Dimensions (mm)      
Height 2100 2100  
Width 650 650  
Depth 600 600  
Pipe Connections (mm)      
Central Heating Circuit 22 22  
Hot and Cold Water 22 22  
Max Hot Water Flow Rate (l/min) 35 35  
Electrical Rating at 230V, 50Hz AC (kW) 6.5 9.0  
Dwelling Type      
Bedrooms 1 - 2 1 - 2  
Bathrooms 1 1  
En-Suite Showers 1 1  
Nominal Volume (litres) 225 225  
Weight (kg)      
Empty 90 90  
Full 315 315  
System Pressures      

Thermal store (open vented) maximum pressure

 10m 10m  
Central heating circuit (sealed) maximum pressure 3.0 bar 3.0 bar  
 

The maximum design heat loss of the dwelling is 6.5kW but the optimum running cost will be achieved at around 4.5 kW with the preferred E10 tariff.

 

Download the ElectraMate A-Class Brochure - Click Here

 
Products Boilers Mains Pressure Gas Fires Electric Fires Gas Cookers Fire Surrounds Order Form Contact Us Terms

www.gasapplianceguide.co.uk     www.ifskitchens.co.uk    www.fossie.com  and www.showerright.co.uk are operated by IFS (Portsmouth) Ltd

All design and content of this website are the copyright of IFS (Portsmouth) Ltd