The Gledhill ElectraMate has been established as the undisputed no1 solution for apartment building for over 7 years. An electrical appliance that can supply the benefits of mains pressure hot water with wet central heating while making the most of off-peak tariffs and yet require no pressure or temperature relief runaways, it can save tens of thousands of pounds in ducting costs alone.

The A-class redesign now looks even better in the cupboard and yet takes up less space. It’s simpler to position and install, yet it offers the same superb performance – mains pressure high-quality water to every tap; powerful showers; fast-filling baths and truly responsive central heating - as it ever has.

State of the art technology means that few controls are needed and with simplified switchgear working in timed operation, the load on the electrical supply is minimised.

ElectraMate A-Class can provide up to of 35 litres/minute domestic hot water raised through 35°C directly from the mains. With up to 90% of its energy usage taken at off-peak rates (Economy 10 tariff preferred), the running costs are comparable to gas heating, when annual servicing for a gas system is taken into account.

You can site ElectraMate A-class anywhere. A sealed primary kit is supplied but the primary store is tank-fed so there is no need for pressure or temperature relief valves or associated runaway pipework and this can save tens of thousands of pounds in an apartment building.

All system components are installed, factory-tested and enclosed within an attractive steel casing. The highest level of environmentally-friendly insulation ensures reduced standing losses and low cupboard temperatures

The appliance’s advanced construction ensures a long life and the primary store design removes the need for annual checks on sacrificial anodes, found on many unvented units.