| MagnaClean |
Central Heating Filter System |
| We live in an age of high efficiency boilers, but for many years little attention has been placed on the cleanliness of central heating systems. |
 |
The majority of systems suffer from black iron oxide
contamination, which creates thick sludge deposits that are the result of
corrosion taking place within radiators and other metallic components. The
oxide particles can range from very large to sub-micron, with the latter
leaching into the system water continuously during use. These particles bond
to all components, often causing premature failure of pumps and valves. When
they contaminate the boiler heat exchanger and pipework, dramatic efficiency
losses result. Tests have shown that even a minimal build up results in a
serious drop in boiler efficiency!  The MagnaClean filter will provide many years of protection, maintaining the high efficiency of your heating system, resulting in financial benefit and increased reliability, and is backed by a two year limited guarantee. |
|
HOW IT WORKS |
| MagnaClean Professional has been carefully designed
to remove particulate from suspension, whilst allowing 100% flow rate at all
times. Installation is simple, with each isolation valve rotating through 360 degrees, supporting any number of location options. These valves have been specially designed for use with MagnaClean and have high quality P.T.F.E seals. An added advantage to installers is the ‘Pro-Fill’ air vent built in to the lid. This special vent incorporates a unique one-way valve, allowing the installer to inject corrosion inhibitor chemicals directly into the MagnaClean without the need to isolate anything. Just remove the air vent screw, inject the chemical and replace the air vent screw. Simple! |
 |
 |
 |
 |
| Container of Black Iron Oxide Sludge | Add MagnaClean | 15 Seconds later the MagnaClean Collects Particles | Easy to remove for cleaning |