|
Home Up Gledhill Stainless Lite Gledhill Torrent Solar GulfStream A-Class Boiler Thermal Store BoilerMate A Class Gledhill BoilerMate SP BoilerMate Thermal Store Gledhill Accolade A Class Gledhill Electramate Gledhill Boilers Gledhill SystemMate Xstreme unvented hot water Gledhill PulsaCoil
| |
| Xstreme |
Gledhill Compact
unvented
mains pressure hot water storage cylinder |
|
|
Gledhill Xtreme Unvented Mains Pressure Hot Water System |
Domestic mains pressure hot
water |
| The
Power of Mains Pressure |
| The proven twin-tank
design of the Xstreme
means that it can deliver mains pressure hot water at high flow rates -
sufficient to fill a bath in under 3 minutes and is eminently suitable for
multi-bathroom properties. A powerful shower can also be used without the
need for expensive pumps. All this can be achieved without the need for a
separate cold water storage tank.
Choose Xstreme
Indirect and you have the the option of 5 models, with heating and
recovery times up to twice as fast as less efficient alternatives, and which
can be heated by any oil or gas fired boiler. Or Xstreme
Direct with 3 electrically-heated options. |
 |
| Low standing
loss |
| The rectangular case allows much
greater foam thickness than conventional circular shapes but fits neatly into
rectangular or square cupboards. |

| How it works |
|
- Cold water from the main enters at A
ensuring that all the contents can be used.
- Very high efficiency coils B provide fast
heat-up and the configuration promotes gravity circulation between the
tubes to ensure there is no stagnant water.
|
 |
 |
| Xstreme
Indirect
model supplied complete with: |
- Combination pressure regulator inlet group
c/w expansion valve and check valve
- Two port zone valve
- Tundish
- Expansion vessel (potable)
- Dual control and overheat thermostat
The following controls are factory fitted:
- Pressure and temperature relief valve
- One 3/4" immersion element c/w overheat
thermostat
|
| Xstreme
Direct
model supplied complete with: |
- Combination pressure regulator inlet group
c/w expansion valve and check valve
- Tundish
- Expansion vessel (potable)
The following controls are factory fitted:
- Pressure and temperature relief valve
- One 3/4" immersion element c/w overheat
thermostat
|

| Revolutionary
design |
 |
Twin tank design for strength
and performance proven over a decade |
 |
Indirect patterns feature high
efficiency heat exchanger for fast recovery |
 |
410mm depth of unit
provides ample space for plumbing on the front face giving ease of
installation and maintenence |
 |
Attractive plastisol coated
steel case gives 'cupboard appeal' |
 |
Foam filled to give the lowest
possible standing loss/highest efficiency |
|
| Simple to
install |
| Whichever model best suits your
needs, you'll find Xstreme
is easy to handle and
simple to install. Complete with it's own carrying handles, it is supplied
shrink-wrapped with a simple kit of ancillary fittings. With all pipework
connections and controls mounted on the front of the unit, there is no need
for handing; the inlet control group can be adjusted to accommodate minor
variations in pipework and is arranged in such a way that the filter is
accessible without dismantling the cartridge. |
|