Gledhill Stainless Lite Plus HP (Heat Pump)

Gledhill Stainless Lite PLUS HP range of unvented stainless steel cylinders specifically for heat pump applications providing mains pressure domestic hot water.

This model has been developed to maximise the lower output temperatures available from a heat pump.

The  multi-pass stainless steel heat exchanger is a totally new design consisting of parallel corrugated tubes reducing pressure loss whilst maximising the heat exchange.

Many medium to large heat pumps need heat exchangers in the store that will cope with higher flow rates associated with primary temperatures that typically run at 50 or 60 degrees C.

• For use with either air source or ground source heat pumps

• High efficiency coil maximises heat transfer to the cylinder contents by utilising corrugated tubing for greater surface area.

• 3kW immersion heater.

• 90° elbow, flexihose and drain valve supplied as standard

• 25 Year Warranty

HP models are available in Standard HP, HP & Solar and slimline models